2843 LITRE SECTIONAL WATER TANK, TOTALLY INTERNALLY FLANGED (TIF)
2843 Litre Nominal capacity GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides.

Modular construction utilising bolt together panels suitable for on-site assembly.

Insulated or None insulated available, Kiwa REG4 & WRAS approved for use with potable water.
Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary.

All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by fully trained engineers for an additional cost.

TIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab.

TIF tanks require a minimum of 50 mm working clearance to three sides of the tank, 500mm on the other, a minimum of 500 mm above the man-way height and/or 350 mm above any raised float valve housing.

Optional Extras:
• Float valves
• Screened overflow ¾'' (22 mm) up to 4"
• Screened warning pipe ¾'' (22 mm)
• BSP female tank connector 0.5" up to 2"
• Purewater aftercare service

Important: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates.

A Totally Internally Flanged Tank (TIF) is the ideal sectional format for plant rooms with minimal space, due to much smaller access requirements.

Applications where there is minimal working room available, all panel joint flanges are accessed from inside the tank.
Comprising: Internally flanged base, internally flanged sides, internally flanged roof.
Insulated to the sides and cover only.

Specification:
• Insulation: 38mm Fully Encapsulated to Sides
• Panel Size: 1000 x 1000mm high
• Side Panels: Internally Flanged
• Base Panels: Internally Flanged
• Heavy Duty Lid: Internally Flanged
• Internal fixings: Stainless Steel - 316
• Raised float valve housing comes with AB Air Gap
• Galvanised foundation Levelling Steels: Included (To suit flat structural foundation pad)

PW.2x1x1.TIF Dimensions:
Air Gap - AB
Available in Single or twin compartment (Divided) - Single
External Dimensions - 2250x1250x1725mm high
Assembly area required - 50mm to 3 sides, 500mm to the other - height required 2225mm.

Does your water tank need a clean?
Water can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.

For more information regarding this service, please see - Does your water tank need a clean?

Annual Disinfection Information and Options:
• 6 month inspections of water storage tank
• 6 & 12 month clean and chlorination of water storage tank
• TVC and Legionella sampling
• Tank upgrade works available, bringing the old tanks up to current regulations
• Full tank replacement works available
• Legionella risk assessments including schematic drawings if required
• Microbiology analysis - water sampling via UKAS approved laboratories
• Building flush and mains injection
• Replacement of hollow roof struts.